User`s guide

Installation
2-3
Installing the Console Port Cable
1. Attach the Console Port cable to the serial port. Attach
the other cable end to the serial port on a terminal or a
PC running a terminal emulation program. Use a 9-pin
male to 9-pin female straight through cable.
2. Set the terminal to 9600 Baud, No -Parity, 8 data bits,
1 Stop bit, and ANSI compatible.
NOTE: This connection is required for setting up initial
configuration information. After configuration is
completed, this cable may be removed until additional
configuration is required via the serial port.