User`s guide

Installation
2-1
Installation
This section describes the procedures for installing the
Aironet Wireless Bridge.
Installing the Antenna
Before installing your Bridge System, we recommend that
you test the Bridge using the 2.2 dBi dipole antenna
included in your package. Once testing is completed, install
your Wireless Bridge for use with the appropriate antenna
for your application using the following the instructions.
1. With the unit powered off, attach the lightning arrestor
to the antenna connector.
NOTE: The lightning arrestor is available in the Bridge
Package option or may be purchased separately.
STP
UTP
Token Ring
Ethernet
10Base2
10Base5
10BaseT