User`s guide

26
5. Go to the next section, "Setting Configuration
Parameters."
Setting Configuration Parameters
To configure the Wireless Bridge to communicate with the
other elements in your radio and/or wired network, you need
to access the Configuration Menu and set:
•
Radio Network parameters: System Identifier (SID),
root/repeater mode, bit rate, and frequency
•
Ethernet activity, frame size, and port
Begin by selecting the Configuration option from the Main
Menu.
1. Type "1" at the prompt (>) to select "Configuration" from
the Main Menu.
The Configuration Menu appears on the terminal
screen.
2. Go on to the next section, "Configuring the Radio
Network."