User`s guide

Viewing the Bridge’s Top Panel Indicators

The Bridge has three Indicators on its top panel as shown

below.

•

Radio Indicator—This indicates radio traffic activity; it

flashes green whenever the radio transmits or receives a

data packet.

•

Status Indicator—This indicates operational status;

flashing green indicates the Bridge is operating normally.

When the Bridge has accepted a Radio registration the

indicator becomes solid green.

•

Network Indicator—This indicates Ethernet network activity;

it flashes green whenever a data packet is transmitted or

received over the network link.

When power is initially applied to the Bridge, all three

Indicators will flash yellow, red and then green, in sequence,

to test the functionality of the Indicators. The Power-On Self

Test follows. If any power-on test fails, the Status Indicator

will go solid red and the unit will stop functioning

Refer to

the

BR1000-E/BR2000-E/BR2040-E Technical Reference

Manual

for error codes.