User`s guide

22
Connecting the Power Pack
After you have made the network connection, connect the
Power Pack to the Bridge.
1. Connect the small plug on the end of the Power Pack
cord into the 12-18VDC Port on the back of the Bridge
as shown below.
2. Plug the other end of the Power Pack into an electrical
outlet (120VACor 90-240VAC, as appropriate).
3. Press the On/Off Switch to turn on the Bridge.
4. With the Bridge on, follow the instructions in the next
section ("Viewing the Bridge’s Top Panel Indicators") to
check the Bridge’s indicators for proper startup.