User`s guide

6 - 4 Aironet Wireless Client

Setting SNMP Location and Contact Identiﬁers (Location, Contact)

Use the location and contact options to specify the location of the

SNMP workstation and the contact name of the individual responsible

for managing it in the event of problems. See Chapter 7 “Conﬁguring

SNMP”.

You may enter an arbitrary string of up to 20 characters for each item.

Conﬁguring the IP Routing Table

The IP routing table is entered using the Conﬁguration Ident Routing

Menu shown below. To access this menu, select Routing from the Con-

ﬁguration Ident Menu.

The IP routing table controls how IP packets originating from the

Aironet Wireless Client will be forwarded.

If the destination IP address exactly matches a host entry in the table,

the packet will be forwarded to the MAC address corresponding to the

next hop IP address from the table entry.

Configuration Ident Routing Menu

Option Value Description

1 - Display - Display route table entries

2 - Host - Add a static host route

3 - Net - Add a static network route

4 - Default [ 149.023.130.050 ] - Internet default gateway

5 - Delete - Delete a static route

Enter an option number or name, Ò=Ó main menu, <ESC> previous menu

UCE.BK Page 4 Wednesday, February 10, 1999 12:10 PM