User`s guide

5 - 6 Aironet Wireless Client
Telnet Connection and Terminal Type (Telnet, Type)
If the connection is to or from a host, the Serial Client may be conÞg-
ured to use the telnet protocol on top of the TCP protocol. The Serial
Client will perform enough negotiation of the telnet parameters to get
the connection going. You may also specify the terminal string type you
wish the unit to report back to the host during the negotiation.
> telnet
Enter on or off : on
> type
Enter a string : vt100
Setting the UART Parameters (Port)
Selecting the port option from the menu will bring up the ConÞguration
Serial Port Menu.
These parameters may be different from those in the ConÞgure Console
Menu. The ConÞgure Console parameters are used whenever the Serial
Port is used to communicate with the console menus. The ConÞguration
Serial Port parameters control the port settings when the Serial Port is
running in application mode.
When running the application, the Serial Client is typically connected
with a device other than the PC or terminal used for conÞguration. This
device will need different port settings.
Configuration Serial Port Menu
Option Value Description
1 - Rate [ 9600 ] - Console baud rate
2 - Bits [ 8 ] - Bits per character
3 - Parity [ none ] - Console parity
4 - Flow [ hardware ] - Flow control type
UCE.BK Page 6 Wednesday, February 10, 1999 12:10 PM