User`s guide

Configuring the Ethernet or Serial Port 5 - 3
Setting Client Addresss (Add, Remove, Display)
Use the add, remove, or display options to update the client address list.
Serial Configuration Menu
Forwarding by Time (Timeout)
The timeout option will forward the buffered characters if the serial line
goes idle for the entered number of character times. This type of for-
warding is the most general and useful. If the unit receives a burst of
one or more characters, then no more for a length of time, this parameter
will cause the buffer to be forwarded.
The timeout option may be disabled by setting the value to zero. The
value entered is measured in character times so it is independent of bit
rate and the other parameters.
Configuration Serial Menu
Option Value Description
1 - Timeout [ 3 ] - Idle forwarding time in characters
2 - Delimiters [ "" ] - Packet delimiting characters
3 - Buffer_size [ 256 ] - Maximum packet size
4 - Partner [ none ] - Partner address
5 - Tcp_port [ 1000 ] - Partner TCP port number
6 - Telnet [ off ] - Use telnet protocol
7 - Type [ "ansi" ] - Telnet terminal type
8 - Port [ menu ] - Port set-up
Enter an option number or name, Ò=Ó main menu, <ESC> previous menu
>_
UCE.BK Page 3 Wednesday, February 10, 1999 12:10 PM