User`s guide

Configuring the Radio Network 4 - 3
Using the Configuration Radio Menu
The radio network is configured using the Configuration Radio Menu. To
access this menu, select Configuration from the Main Menu then select
Radio from the Configuration Menu.
Establishing an SSID (SSID)
This string functions as a password to join the radio network. Nodes
associating to the Aironet Wireless Client must supply a matching value,
determined by their configurations, or their association requests will be
ignored. Use the rates option to define the rate at which the unit can
receive information.
Nodes will only be allowed to transmit to other Aironet Wireless Clients
using the same data rate.
Selecting the Data Rate (Rates)
Use the rates option to define the rate at which the unit can receive
information.
Nodes will only be allowed to transmit to other Aironet Wireless Client
using the same data rate.
Configuration Radio Menu
Option Value Description
1 - Ssid [interoperate] - Service set identification
2 - I80211 [ menu ] - 802.11 parameters
3 - Rates [ 1_2 ] - Frequency hopper parameters
4 - Basic_rates [ 1 ] - Basic bit rates in megabits/second
5 - Adhoc [ off ] - Enable non-access point mode
6 - Install [ menu ] - Installation utilities
7 - Extended [ menu ] - Extended parameters
Enter an option number or name, Ò=Ó main menu, <ESC> previous menu
>_
UCE.BK Page 3 Wednesday, February 10, 1999 12:10 PM