User`s guide

2 - 16 Aironet Wireless Client

Using the Remote Menu

The Conﬁguration Console Remote Menu is used to restrict remote

access to a list of speciﬁc hosts. The list controls access via telnet,

HTTP, or FTP. SNMP access is controlled separately on the Conﬁgura-

tion SNMP Menu.

If the list is empty, any host in the infrastructure is allowed to attempt to

connect. When the appropriate password is provided, the connection is

allowed. If the list contains entries, any host not on the list will not be

allowed access. An entry in the list may be speciﬁed as either an IP

address or a MAC address.

Enabling Telnet or HTTP Connections (Telnet or HTTP)

Any node on the infrastructure (or radio) that supports the telnet proto-

col may connect to the Console Port. Also any node on the infrastruc-

tures that can run a Web browser may access the Console menus. See

“Telnet Access” and “Web Access”.

Enabling Frames (Frame)

Any node on the infrastructure (or radio) that supports HTML frames

may connect to the Console Port.

Configuration Console Remote Menu

Option Value Description

1 - Telnet [ on ] - Allow telnet connections

2 - Http [ on ] - Allow http connections

3 - Frame [ on ] - Use HTML frames

4 - Display - Diplay the remote host list

5 - Add - Add a remote host

6 - Remove - Remove a remote host

Enter an option number or name, Ò=Ó main menu, <ESC> previous menu

UCE.BK Page 16 Wednesday, February 10, 1999 12:10 PM