User`s guide

Accessing the Console System 2 - 15

CAUTION: Make sure you write down the passwords you have established

and keep them in a safe place. If you forget your password, the unit will

have to be returned for factory servicing. Please contact Aironet Technical

Support for further instructions.

Enabling Linemode (Linemode)

Enable linemode when working with telnet and terminal emulators that

do not send characters when typed, but rather save them until the opera-

tor presses the carriage return at the end of a line.

The Console will not automatically complete any typed commands or

information when a space or carriage return is inserted.

To enable linemode:

1. Select Conﬁguration on the Main Menu.

2. Select Linemode on the Conﬁguration Console Menu.

3. Enter “On” to enable line mode.

NOTE: Some telnet programs will automatically invoke linemode by send-

ing the appropriate telnet commands when they connect to the Aironet

Wireless Client.

UCE.BK Page 15 Wednesday, February 10, 1999 12:10 PM