User`s guide

2 - 14 Aironet Wireless Client
è To Set a Privilege Level:
1. Select Privilege from the Main Menu.
Enter one of [off, readonly, write] :
2. Type the first letter of your selection and press ENTER.
è To Set a Password:
1. Select Configuration from the Main Menu.
2. Select Console from the Configuration Menu.
3. Select the appropriate password option from the Configuration Con-
sole Menu.
Enter one of [none, a password of between 5 and 10 char-
acters] :
n Rpassword: For Read-Only privilege
n WPassword: For Read-Write privilege
n None: Enter this text string if no password is needed
4. Type your password and press any key.
Enter the password again, one of [none, a password of
between 5 and 10 characters] :
5. Retype your password for confirmation.
NOTE: After a privilege level has been assigned, anyone attempting to
access that level will be prompted for the password. This allows you to set
various privilege levels for individuals, providing them with access to
some options, while denying them access to others. Remember pass-
words are case sensitive. If an incorrect password is entered, the console
will pause briefly before reprompting. If connected via telnet, the connec-
tion will be dropped after three consecutive failures and a severe error log
will be displayed.
i
UCE.BK Page 14 Wednesday, February 10, 1999 12:10 PM