User`s guide

Accessing the Console System 2 - 11
Using the Configuration Console Menu
The Console system is configured using the Configuration Console
Menu. To access this menu, select Configuration from the Main Menu
then select Console from the Configuration Menu.
Setting the Terminal Type (Type)
The terminal type may be set to Teletype (TTY) or ANSI using the Con-
figuration Console Menu.
If the terminal or emulation program you are using supports the ANSI
escape sequences, you should use ANSI.
n Teletype mode: Displays text with little or no formatting. Screens
are not cleared prior to new screens appearing.
n ANSI mode: Provides text in a formatted manner. In addition, the
screen will be cleared before each new screen is displayed.
Configuration Console Menu
Option Value Description
1 - Type [ teletype ] - Terminal type
2 - Port [ menu ] - Port set-up
3 - Rpassword - Set readonly privilege password
4 - Wpassword - Set write privilege password
5 - Linemode [ off ] - Console expects complete lines
6 - Remote [ menu ] - Control remote access
Enter an option number or name, Ò=Ó main menu, <ESC> previous menu
>_
UCE.BK Page 11 Wednesday, February 10, 1999 12:10 PM