User`s guide

Accessing the Console System 2 - 7
Example 1: To access the Radio Configuration Menu (located two sub-
menus down):
1. At the Main Menu prompt type:
configuration radio
2. Press ENTER. The Radio Configuration Menu appears.
Example 2: To access the packet size option from the Radio Link Test
Menu (located three sub-menus down):
1. At the Main Menu prompt type:
configuration radio linktest size 25
2. Press ENTER and the Main Menu is re-displayed.
Telnet Access
Once the Aironet Wireless Client has been assigned an IP address and
connected to the infrastructure, you may connect to the Console system
from a remote PC or host by executing the telnet command.
Once the connection has been made, the Main Menu will appear. The
Main Menu functions the same for both telnet access and Serial Port
connections.
While a telnet session is in progress, you may not use the Console Port
to gain access to the menus. If any characters are entered, the following
message is printed identifying the location of the connection.
Console taken over by remote operator at 192.200.1.1
<use BREAK to end>
If you enter a break sequence, the remote operator will be disconnected
and control of the Console is returned to the Console Port.
UCE.BK Page 7 Wednesday, February 10, 1999 12:10 PM