User`s guide

2 - 6 Aironet Wireless Client
Commands That Display Information
There are several types of commands that display information to the
operator. All displays end with a prompt before returning back to the
menus. If nothing is entered at the prompt for 10 seconds, the display
will automatically refresh.
n Single page non-statistical displays end with the following prompt.
Enter space to re-display, q[uit] :
Any character other than space will cause the display to exit.
n Single page statistical displays end with the following prompt.
Enter space to re-display, C[lear stats], q[uit] :
Entering a “C” (capital) will reset all statistics to zero.
n Multiple page table displays end with the following prompt.
Enter space to redisplay, f[irst], n[ext], p[revious],
q[uit] :
Parts of the prompt may or may not be present depending on the dis-
play. If you are not at the first page of the display, you may enter “f”
to return to the first page or “p” to return to the previous page. If
you are not at the last page you may enter “n” to go to the next page.
Command Line Mode
Another way to move within the Console is to enter commands directly
from the Main Menu. Commands allow you to bypass the menu system
and go directly to any level sub-menu or option. Enter the list of sub-
menus, command names, and information separated by space characters.
UCE.BK Page 6 Wednesday, February 10, 1999 12:10 PM