User`s guide

Accessing the Console System 2 - 5
n Integers: A decimal integer. The prompt will indicate the range of
allowed values.
Enter a size between 1 and 100 : 99
hexadecimal integer – a number specified in hexadecimal using the
characters 0-9 and a-f or A-F.
Enter a hex number between 1h and ffh : 1a
n Network address: An infrastructure or MAC level address of 12
characters or less. Omit leading zeros when entering an address.
Enter the remote network address : 4096123456
n IP address: An internet address in the form of 4 numbers from
0-255 separated by dots (.). Leading zeros in any of the numbers
may be omitted.
Enter an IP address : 192.200.1.50
Once all information has been entered the command will execute. If the
information entered changed a configuration item, the new value will be
displayed in the menus.
Some configuration commands only allow the choice between two fixed
values. When the menu item is selected, the opposite value to the current
value is chosen. For example, if the configuration item is only a selec-
tion between on and off and the current value is on, then selecting the
menu option will select the off value.
Some commands which have a severe effect on the operation of the unit
(such as the restart command) will prompt to be sure you want to exe-
cute the command.
Are you sure [y/n] :
If you enter anything other than a “y” or a “Y” the command will not be
executed.
If you are being prompted for information, you may cancel the command
and return to the menu by typing ESCAPE.
UCE.BK Page 5 Wednesday, February 10, 1999 12:10 PM