User`s guide

1 - 10 Aironet Wireless Client
Using the Mounting Bracket
To mount the Aironet Wireless Client to a wall, use the mounting
bracket.
1. Select the location to mount the unit.
2. Place the flat side (without tabs) of the bracket against the wall with
the arrows pointing to the right or left (Figure 1.8).
3. Using four No. 6 pan screws, screw the mounting bracket into the
wall.
4. Align the 4 slotted holes at the back of the unit with the 4 tabs on
the bracket.
Figure 1.8 - Mounting Bracket
UCE.BK Page 10 Wednesday, February 10, 1999 12:10 PM