User`s guide

Installing the Aironet Wireless Client for Ethernet or Serial 1 - 9
Back Panel Indicators (Ethernet Only)
The back panel indicators are shown in Figure 1.7.
n 10BaseT polarity: Solid amber to indicate the 10BaseT polarity is
reversed. Check cable connections.
n 10BaseT active: Solid green to indicate the 10BaseT has been
configured as the active port.
n Ethernet Rx: Blinks green when an Ethernet packet has been
received.
n Ethernet Tx: Blinks green when an Ethernet packet has been
transmitted.
Figure 1.7 - Back Panel Indicators
POWER
10BaseT
CONSOLE/RS232
RESET
ANT
ANT
10BaseT Active
10BaseT Polarity
Ethernet Tx
Ethernet Rx
UCE.BK Page 9 Wednesday, February 10, 1999 12:10 PM