User`s guide

1 - 6 Aironet Wireless Client

Attaching the AC/DC Power Pack

and Powering On

1. Insert the small plug on the end of the AC/DC power pack cord into

the power port (Figure 1.5).

2. Plug the AC/DC power pack into an electrical outlet (120VAC/60Hz

or 90-264VAC/47-63Hz as appropriate).

NOTE: Connecting the power pack powers on the Aironet Wireless Client.

When power is initially applied to the Aironet Wireless Client, all three

indicators will blink in sequence to test the functionality of the indica-

tors.

Figure 1.5 - A/C Power Pack Connection

POWER

CONSOLE/RS232

RESET

ANT

POWER

10BaseT

CONSOLE/RS232

RESET

ANT

Ethernet Wireless Client Serial Wireless Client

ANT

UCE.BK Page 6 Wednesday, February 10, 1999 12:10 PM