User`s guide

I-ii
from automatic linktest 4-10
how alarms set status indicator 10-7
locking status indicator 10-9
top panel 1-7
Installation
antenna 1-3
indicator displays 1-7
radio tests 4-6
IP address 6-3
IP subnet mask 6-3
L
Linktest 4-6
automatic test on startup 4-9
continuous 4-10
multicast test 4-7
remote test 4-8
specifying the test 4-8
unicast test 4-8
viewing errors 4-9
Loading new firmware/configurations 11-5
via BOOTP/DHCP 11-11
via distribute command 11-10
via FTP 11-7
Locating a unit 11-4
Location string 6-3
logs
clearing the history buffer 10-6
enabling status indicator locking 10-9
error logs 10-3
forwarding logs to Unix syslogd 10-9
information logs 10-2
logs from statistic changes 10-8
overview 10-2
severe error alarms 10-4
specifying logs to print 10-7
specifying logs to save 10-7
type of logs to light status indicator 10-7
viewing log history buffer 10-5
M
Map, network 9-4
Menus
command confirmation 2-5
command line mode 2-6
description of a menu 2-2
display commands 2-5
editting characters 2-3
entering commands and arguments 2-4
selecting an entry 2-3
N
Network IDs
controlling display of 9-5
setting our own 6-2
Network Map 9-4
Node name
setting our own 6-2
P
Packets
and protocols xiii
data transparency xiii
Passwords
setting 2-13
ping, a remote IP address 11-4
Ports
Ethernet 5-1
privilege levels 2-12
UCE.BK Page ii Wednesday, February 10, 1999 12:10 PM