User`s guide

B-4 Aironet Wireless Client
Logs Alarm and log control
History Log and alarm history
Clear Clear the history buffer
Printlevel Type of logs to print
Loglevel Type of logs to save
Ledlevel Type of logs to light status led
Statistics Set alarms on statistics
Syslog Unix syslogd address
Lockled Enable LED status locking
Diagnostics Maintenance and testing commands
Network Network connections
Connect Start telnet session
Escape Connection escape sequence
Find Flash LEDs to find unit
Ping Send an IP PING packet
Linktest Run a link test
Restart Equivalent to power-up
Shutdown Prepare to power off-unit
Defaults Return to default configuration
Load Load new version of firmware
Xmodem Xmodem load from serial port
Crc-xmodem Xmodem-CRC load from serial port
Ftp Load using FTP
Get Load a firmware/config file
Put Send a firmware file
Config Send a configuration file
Dest Host IP address
Username Host username
Password Host password
Filename Host filename
Distribute Distribute the firmware
Go Start the distribution
Type What to distribute
Control How to control distributions
Bootp/DHCP Use BOOTP/DHCP on startup
Class DHCP class ID
Privilege Set privilege level
Help Introduction
UCE.BK Page 4 Wednesday, February 10, 1999 12:10 PM