User`s guide

xiii Aironet Wireless Client
About the Technical Reference Manual
This manual covers the installation, configuration, control, and
maintenance of your Aironet Wireless Client.
Please read
Chapter 1 – Installing the Aironet Wireless Client for
Ethernet or Serial before attempting to install, or use the hardware and
software described in this manual.
The technical reference manual is arranged as follows:
Chapter 1 – Installing the Aironet Wireless Client for Ethernet or
Serial – Describes the physical installation of the Aironet Wireless Cli-
ent.
Chapter 2 – Accessing the Console Port – Introduces you to the Console
Port and shows you how to set up and configure the Console Port
parameters.
Chapter 3 – Before You Begin – Provides you with an overview of the
Configuration Menu and how to save and restore your configurations.
Chapter 4 – Configuring the Radio Network – Contains detailed
procedures for configuring your Radio Network.
Chapter 5 – Configuring the Ethernet or Serial Port – Contains detailed
procedures for configuring the Ethernet or Serial Port.
Chapter 6 – Setting Network Identifiers – Outlines the procedures for
setting the Aironet Wireless Client’s Network Identifiers.
Chapter 7 – Configuring SNMP – Describes how to configure
the Aironet Wireless Client for use with the Simple Network Manage-
ment Protocol.
Chapter 8 – Viewing Statistics – Describes how to use the Statistics
Menu to monitor the performance of the Aironet Wireless Client.
Chapter 9 – Setting Up the Association Table – Provides you with an
introduction to the association process and detailed procedures for
setting up the Aironet Wireless Client’s Association Table.
UCE.BK Page xiii Wednesday, February 10, 1999 12:10 PM