User`s guide

Performing Diagnostics 11 - 9
When you select the FTP option, the Diagnostics Load FTP Menu
appears:
Downloading a New Firmware/Configuration File (Get)
Use the get option to download (retrieve) firmware or a configuration
file. Once the file has been loaded, the unit will check the first characters
of the file. If “! CONFIGURATION” is present, the file contains menu
configuration commands. Otherwise the file is considered to be firmware
and will be loaded in the flash memory and then executed.
è To Download Firmware using FTP:
1. Load the file onto the PC, host, or Aironet Wireless Client you will
retrieve from.
2. Select the dest option and type in the IP address of the host PC or
Aironet Wireless Client.
3. Select the username option and type in the username required to
access the firmware file.
If downloading from another Aironet Wireless Client, the username
option must have a value even though the value is not used by the
remote Aironet Wireless Client.
Diagnostics Load Ftp Menu
Option Value Description
1 - Get - Load a firmware/config file
2 - Put - Send a firmware file
3 - Config - Send a configuration file
4 - Dest [ 000.000.000.000 ] - Host IP address
5 - Username [ "" ] - Host username
6 - Password - Host password
7 - Filename [ "" ] - Host filename
Enter an option number or name, Ò=Ó main menu, <ESC> previous menu
>_
UCE.BK Page 9 Wednesday, February 10, 1999 12:10 PM