User`s guide

Performing Diagnostics 11 - 5
The sequence may be up to 10 characters in length. To enter non-
printable characters in the sequence you may:
n Use the two-character combination of caret (^) and the alphabetic
character corresponding to the control character. For example, to
enter “control Z”, use the string “^Z”.
n Use a backslash “\” followed by three octal numbers
n Use a dollar sign “$” followed by two hexadecimal numbers
Physically Locating a Unit (Find)
Use the find option to blink the amber indicators of the Aironet Wireless
Client on and off. Find a unit you can telnet to if you are not sure of it’s
exact location. Type “CTRL-C” to stop the command.
Sending a Ping Packet (Ping)
Use the ping option to test infrastructure connectivity from the Aironet
Wireless Client to other IP nodes. The ping option sends an ICMP
echo_request packet to a user-specified remote node. If the remote node
receives the packet it will also respond with an ICMP echo_response
packet.
The Aironet Wireless Client will send the echo_response packet and
wait 3 seconds for a response. If none is received, another echo packet is
sent. This is repeated up to five times. If a response is received and a
message is displayed, the command disappears from the screen. Type
“CTRL-C” to stop the command.
UCE.BK Page 5 Wednesday, February 10, 1999 12:10 PM