User`s guide

Setting Up Event Logs 10 - 3
RARP set new IP address
A RARP server answered a request for an IP address with an address
different from the one currently saved. The currently saved value is
overwritten.
Associated to router “node address”
This log is produced when the unit, configured as a repeater, associates
to its parent node.
SNMP: “command text”
A SNMP management station sent the unit a “set” variable request
which was successfully executed. The “command text” is a similar menu
command that has the same effect as the SNMP request.
SNMP access failure from “community name” “IP address” (node
address)
A SNMP management station attempted to access the SNMP agent with
an invalid community name or a name that it was not allowed to use.
TFTP is loading “file name” from “ip address”
This log is produced when the BOOTP server gives the Aironet Wireless
Client the name of a configuration file and then the name of a firmware
file to load.
Error Logs
“Category” Error: nnn “type” errors
This log is produced when any error occurs that is marked by an asterisk
“*” after its count in the statistics displays. These errors are serious
enough to affect the operation of the unit. See the sections on each dis-
play for an explanation of each error.
UCE.BK Page 3 Wednesday, February 10, 1999 12:10 PM