User`s guide

Setting Up the Association Table 9 - 5

The version column displays the ﬁrmware release level currently run-

ning on the unit. If the responding unit is connected to a Token Ring or

an RS-485 LAN, then its LAN address is displayed after the name col-

umn.

Network Map (Trace)

This command builds a table similar to the Network Map Table but does

not continuously display the table. Whenever the contents of the table

change, a log message appears indicating the changes. The command is

most useful for watching the movement of the radio nodes through the

network.

LM3500 202271 found associated to AP3500T 112c80

unit_112c80 Lobby_112c80 lost

NOTE: Press ENTER to exit screen.

NETWORK MAP

Device Node Id IP Address Ver Name

----------- ------------ --------------- ----- -----------------

3500E 00409611cd0e 149.023.165.163 4.1G 3500E_11cd0e

AP3500T 00409611d1e5 149.023.165.169 4.1G AP3500E_11d1e5

UC3500E 004096207206 149.023.165.176 4.1G UC3500E_207206

MC3500 00409611e1f6 149.023.165.178 4.1G MC3500_11e1f6

LM3500 00409620222a 149.023.165.238

AP3500E 00409611855b 149.023.165.160 4.1B AP3500E_11855b

LM3500 00409620222d

Enter space to redisplay, q[uit]:

UCE.BK Page 5 Wednesday, February 10, 1999 12:10 PM