User`s guide

8 - 8 Aironet Wireless Client
Displaying Node Information (Node)
The node command displays current Ethernet or Serial information
about the client.
n Address: Displays the address of the client.
n Signal: Displays the signal strength of the client.
n Tx Pkt: Displays the number of packets transmitted from the client.
n Tx Byte: Displays the actual number of bytes transmitted from the
client.
n Tx Retry: Displays the number of transmitted packets that were
resent by the client.
n Rx Pkt: Displays the number of packets the client has received.
n Rx Byte: Displays the actual number of bytes received by the client.
n Rate: Current bit rate used to transmit to the client.
Radio Node Statistics
ID Address Signal Tx Pkt Tx Byte Tx Retry Rx Pkt Rx Byte Rate
--- ------- ------ ----- ------- -------- ------ ------- -----
004096128e76 45 1012 204322 39 1673 112386
Enter space to redisplay, q[uit]:
UCE.BK Page 8 Wednesday, February 10, 1999 12:10 PM