User`s guide

7 - 6 Aironet Wireless Client
Setting a Community Access Mode (Access)
Use the access option to set the community access mode. There are two
types of access modes – “Read-Only” and “Read-Write”.
n Read-Only: Allows “gets” and “get-nexts” on any readable variable.
n Read-Write: Allows “gets” and “get-nexts” on any variable, as well
as “set” requests on writeable variables.
The default access setting for all community names is “Read-Only”
access.
NOTE: An error response will be returned to the NMS, if the NMS is trying
a “set” request used with a community that has Read-Only access.
Setting or Removing Allowed NMS IP Addresses (Ipadr)
Use the ipadr option to set or remove allowed NMS IP addresses. If the
community has a list of allowed IP addresses, only requests from an
NMS with an IP address in the SNMP communities list will be allowed.
If there is no list, any IP address is allowed. The default list is “Any.”
You will be prompted for:
1. The name of the community to change.
2. Whether you want to add or remove an IP address.
3. The IP address.
UCE.BK Page 6 Wednesday, February 10, 1999 12:10 PM