User`s guide

Configuring SNMP 7 - 3

NOTE: The IP address must be assigned before the Aironet Wireless Cli-

ent can be accessed by an NMS running SNMP. See

Chapter 6 “Setting Network Identiﬁers”.

Enabling the SNMP Agent (Enabled)

The enabled option functions as an On/Off switch for the SNMP agent.

The default setting is “On”. If the parameter is turned “Off”, all incom-

ing SNMP messages will be ignored and no outgoing traps will be gen-

erated.

Configuration Snmp Menu

Option Value Description

1 - Enabled [ on ] - Enable the SNMP agent

2 - Communities [ menu ] - Set community properties

3 - Trapdest [ none ] - IP destination for SNMP traps

4 - Trapcomm [ "public" ] - Community for SNMP traps

5 - Loglevel [ off ] - Type of logs to cause a trap

6 - Authtrap [ off ] - Enable authentication failure trap

Enter an option number or name, Ò=Ó main menu, <ESC> previous menu

UCE.BK Page 3 Wednesday, February 10, 1999 12:10 PM