User`s guide

Aironet Wireless Communications, Inc. 7-27 Confidential and Proprietary
Transmit Command
Command (0x00) Param0 (0x02) Param1 (0x04) Param2 (0x06)
0x000B Transmit FID 0x0000 0x0000 Basic Transmit
Transmit Responses = Success
Status (0x08) Resp0 (0x0A) Resp1 (0x0C) Resp2 (0x0E) Description
0x000B 0x0000 Transmit FID 0x0000 Successful transmit command.
(Transmit may still fail
however).
The original Transmit FID value
is returned to the host for
matching purposes. However,
the FID is under firmware
control and cannot be reused by
the host.
Transmit Responses = Failure
Status (0x08) Resp0 (0x0A) Resp1 (0x0C) Resp2 (0x0E) Reason
Error Qualifier RID RID Offset
0x7F0B 0x0002 Transmit FID 0x0000 Illegal format (Command)
0x7F0B 0x0003 Transmit FID 0x0000 Invalid FID
0x7F0B 0x0005 Transmit FID 0x0000 FD.DataLen field is too long.
Deallocate Command
Used to deallocate a FID which is either a transmit buffer that is no longer to be used, or an allocated
buffer no longer to be used.
Deallocate Command
Command (0x00) Param0 (0x02) Param1 (0x04) Param2 (0x06)
0x000C FID to release 0x0000 0x0000 Deallocate
Deallocate Responses = Success
Status (0x08) Resp0 (0x0A) Resp1 (0x0C) Resp2 (0x0E) Description
0x000C 0x0000 0x0000 0x0000 Successful deallocation
Deallocate Responses = Failure
Status (0x08) Resp0 (0x0A) Resp1 (0x0C) Resp2 (0x0E) Reason
Error Qualifier
0x7F0C 0x0002 0x0000 0x0000 Illegal format (Command)
0x7F0C 0x0003 0x0000 0x0000 Invalid FID
Access Resource Identifier (RID)
The Access Resource Identifier command is used to read and write configuration , status and statistics
information. Each available resource identifier has a specific RID for accessing it. Note, only the most
recently requested RID is available via the BAP registers.