User`s guide

Aironet Wireless Communications, Inc. 7-25 Confidential and Proprietary
Soft Reset Command
This is equivalent to resetting the card.
Note, if this command completes successfully, it does not issue a command done.
Soft Reset Command
Command (0x00) Param0 (0x02) Param1 (0x04) Param2 (0x06)
0x0004 0x0000 0x0000 0x0000 Restart (reboot) the card.
Soft Reset Responses = Failure
Status (0x08) Resp0 (0x0A) Resp1 (0x0C) Resp2 (0x0E) Reason
Error Qualifier
0x7F04 0x0000 0x0000 0x0000 Illegal command – not supported
0x7F04 0x0001 0x0000 0x0000 Illegal format (Command)
0x7F03 0x0002 0x0000 0x0000
Host Sleep Command
This is used by hosts to allow power save operation to achieve maximum power savings. After issuing this
command, the host must not access the card until it is awakened by the host.
There are no responses to this command since the host must stop accessing the card after issuing the
command.
Host Sleep Command
Command (0x00) Param0 (0x02) Param1 (0x04) Param2 (0x06)
0x0085 0x0000 0x0000 0x0000 Host is going to sleep.
Read / Save Configuration Command
This command may be used by hosts to save and restore the configuration to/from nonvolatile storage.
NOTE: the MAC must be disabled to issue this command.
The items saved in the configuration are: Current Configuration RID, SSID List RID, AP List RID and the
Encapsulation RID
Read / Save Configuration Command
Command (0x00) Param0 (0x02) Param1 (0x04) Param2 (0x06)
0x0008 0x0000 0x0000 0x0000 Restore the configuration from
nonvolatile storage.
0x0108 0x0000 0x0000 0x0000 Save the configuration to
nonvolatile storage