User`s guide

Aironet Wireless Communications, Inc. 7-24 Confidential and Proprietary
Disable Command
The disable command is used to disable the operation of the card, typically to allow for a change of the
configuration and subsequent reenable.
Disable Command
Command (0x00) Param0 (0x02) Param1 (0x04) Param2 (0x06)
0x0002 0x0000 0x0000 0x0000 Disable the MAC
Disable Responses = Success
Status (0x08) Resp0 (0x0A) Resp1 (0x0C) Resp2 (0x0E) Description
0x0002 0x0000 0x0000 0x0000 Successful Disable command
Disable Responses = Failure
Status (0x08) Resp0 (0x0A) Resp1 (0x0C) Resp2 (0x0E) Reason
Error Qualifier
0x7F02 0x0002 0x0000 0x0000 Illegal format (Command)
0x7F02 0x0000 0x0000 0x0000 MAC is already disabled
Lose Sync Command
This command is used by a station or a repeater to cause the PC4500/4800 to start rescanning. This may be
required due to a Deauthentication or Disassociation from the parent AP, or due to the link quality
degrading to an unacceptable level.
Lose Sync Command
Command (0x00) Param0 (0x02) Param1 (0x04) Param2 (0x06)
0x0003 0x0000 0x0000 0x0000 Lose Sync with the current cell –
start rescanning.
Lose Sync Responses = Success
Status (0x08) Resp0 (0x0A) Resp1 (0x0C) Resp2 (0x0E) Description
0x0003 0x0000 0x0000 0x0000 Successful Lose Sync command
Lose Sync Responses = Failure
Status (0x08) Resp0 (0x0A) Resp1 (0x0C) Resp2 (0x0E) Reason
Error Qualifier
0x7F03 0x0000 0x0000 0x0000 Not Active – MAC must be
enable first
0x7F03 0x0001 0x0000 0x0000 Illegal command – cannot be a
root AP
0x7F03 0x0002 0x0000 0x0000 Illegal format (Command)