User`s guide

Aironet Wireless Communications, Inc. 7-22 Confidential and Proprietary
Command Descriptions
COMMAND SUMMARY
Command Number Command
0x0000 NOP
0x0001 Enable
0x0002 Disable
0x0003 Force a Loss of Sync
0x0004 Firmware Restart (soft reset)
0x0005 Go to Sleep (must be issued as 0x0085)
0x0006 Magic Packet
0x0008 Read the configuration from nonvolatile
storage
0x000A Allocate Transmit Buffer
0x000B Transmit
0x000C Deallocate
0x0010 NOP (same as 0x0000)
0x0021 Access RID
0x0028 Allocate Buffer
0x0030 PSP nodes (AP only)
0x003E Set PHY register
0x003F Transmitter Test
0x0085 Go to Sleep (No Ack bit is mandatory)
0x0108 Save the configuration to nonvolatile
storage
Note: In the following tables, the Resp0,1,2 fields are shown as zeroes for successful command
responses. These fields are not guaranteed to be zero and should be considered as don’t cares since the
significance is found with the successful Status entry.
NOP Command
Note, the NOP command should never fail, it is provided as verification that the firmware is operational.
NOP Command
Command (0x00) Param0 (0x02) Param1 (0x04) Param2 (0x06)
0x0000 or 0x0010 0x0000 0x0000 0x0000 NOP command
NOP Responses – Success
Status (0x08) Resp0 (0x0A) Resp1 (0x0C) Resp2 (0x0E) Description
0x0000 or 0x0010 0x0000 0x0000 0x0000 Successful NOP