User`s guide

Aironet Wireless Communications, Inc. 7-61 Confidential and Proprietary
Status RID
This RID indicates the current status of the radio.
Offset Name Type Description
+0x0000 u16RidLen u16 Length of this RID including the length field
+0x0002 au8MacAddress u8[8] The MAC address in use by the station.
+0x0008 u16OperationalMode u16 Bit-mapped.
0x0001 = Configured
0x0002 = MAC Enabled
0x0004 = Receive Enabled (to host)
0x0010 = In Sync (synchronized to cell)
0x0020 = Associated
0x8000 = Error
+0x000A u16ErrorCode u16 Non-zero if an error state has been entered
+0x000C u16CurrentSignalQuality u16 A measure of the current signal quality.
+0x000E SSIDlength u16 This length of the following SSID.
+0x0010 SSID u8[32] The SSID that is currently in effect.
Note, this could be null if multiple SSIDs are valid and
the unit is scanning.
+0x0030 au8ApName u8[16] The name of the current BSSID (ESS mode only)
+0x0040 au8CurrentBssid u8[32] BSSID that is currently in effect.
Note, this could be broadcast if the unit is scanning.
+0x0046 au8PreviousBssid1 u8[6] A former BSSID.
+0x004C au8PreviousBssid2 u8[6] A former BSSID.
+0x0052 au8PreviousBssid3 u8[6] A former BSSID.
+0x0058 u16BeaconPeriod u16 (kus) The current beacon period.
+0x005A u16DtimPeriod u16 The current DTIM period (number of beacons between
DTIMs).
+0x005C u16AtimDuration u16 (kus) The current ATIM window duration. Adhoc/Ibss only
+0x005E u16HopPeriod u16 (kus) The current hopping period.
+0x0060 u16ChannelSet u16 The current channel set.
+0x0062 u16Channel u16 The current operating channel.
+0x0064 u16HopsToBackbone u16 0 indicates a backbone association.
+0x0066 u16ApTotalLoad u16 Total load including broadcast/multicast from backbone.
This is the value extracted from the Aironet element.
+0x0068 u16OurGeneratedLoad Total load generated by our station (transmitted and
received).
Excludes received broadcast/multicast traffic.
+0x006A u16AccumulatedArl u16
Radio Information RID
This RID contains radio specific information.
Access Point RID
This RID contains additional information required by the access point for operation.
Offset Name Type Value Description
+0x0000 u16RidLen u16 0x06, read-only Length of this RID including the length field
+0x0002 TIM Addr u16 Read only The “Traffic Indication Map” is updated by the host via
the AUX I/O ports. This is the address of TIM.
+0x0004 Airo Addr u16 Read only The "Aironet Information Element" is updated by the
host via the AUX I/O ports. This is the address of the
Aironet Element.