User`s guide

Aironet Wireless Communications, Inc. 7-58 Confidential and Proprietary
Valid AP List
The AP list contains up to four specified APs that may be matched. This allows a user to limit a unit to a
subset of APs. Multicast addresses are not allowed. A zero address ends the list.
Note, all addresses should be null (all zero’s) to disable the specified AP feature.
Offset Name Type
Factory
default Description
+0x0000 u16RidLen u16 read-only
0x20
Length of this RID including the length field
+0x0002 SpecifiedAP1 u8[6] 0 Specifies the MAC address of an access point to
attempt to associate to first, before looking for other
Access Points
+0x0008 SpecifiedAP2 u8[6] 0 Allows for a secondary AP to associate to if the radio
cannot associate to the primary AP.
+0x000E SpecifiedAP3 u8[6] 0 Allows for a third option when specifying a list of APs.
+0x0014 SpecifiedAP4 u8[6] 0 Allows for a fourth option when specifying a list of
APs.
Driver Name
The driver name and version may be passed down from the host for debug support. This RID is treated
as a read-only value when the MAC is enabled.
Offset Name Type
Factory
default Description
+0x0000 u16RidLen u16 read-only
0x12
Length of this RID including the length field
+0x0002 u8DriverName[16] u8 The driver name and version can be written here for
debugging support