User`s guide

Installation
2-7
Viewing the Indicator Displays
Top Panel Indicators
The indicators are a set of displays located on the top
panel of the Aironet Access Point unit.
• Ethernet or Token Ring Indicator – Used to
indicate network traffic activity. The light is normally
off, but will blink green whenever a packet is
received or transmitted over the Ethernet or Token
Ring interface.
• Status Indicator – Shows solid green when the
Aironet Access Point has accepted a radio
association.
• Radio Indicator – Used to indicate radio traffic
activity. The light is normally off, but will blink green
whenever a packet is received or transmitted over
the radio.
When the Aironet Access Point is initially powered up,
all three displays will blink amber, red and then green,
in sequence. If a power-on test fails, the status indicator
will go solid red and the unit will stop functioning. See
Table 2.1 for a detailed explanation of the Top Panel
indicators.
RadioStatusEthernet
or Token Ring