User`s guide

Installation
2-6
Attaching the AC/DC Power Pack
and Powering On the Ethernet or Token
Ring Access Point
1. Insert the small plug on the end of the AC/DC power
pack cord into the power port.
2. Plug the AC/DC power pack into an electrical outlet
(120VAC/60Hz or 90-264VAC/47-63Hz as appropriate).
3. Power on the Aironet Access Point by pushing the
On/Off button.
When power is initially applied to the Aironet Access Point,
all three indicators will blink in sequence to test the
functionality of the indicators.
On/Off Button