User`s guide

Installation
2-5
Installing the Token Ring Connection
The Aironet Access Point for Token Ring supports two
connection types:
• Shielded Twisted Pair (STP)
• Unshielded Twisted Pair (UTP)
To Attach the STP Cabling:
1. Make sure the unit is powered off.
2. Attach the transceiver connector to the DB-9 port.
3. Attach the other end of the transceiver drop cabling to a
Token Ring Multi-Station Access Unit (MAU).
To Attach the UTP Cabling:
1. Make sure the unit is powered off.
2. Plug the RJ-45 connector into the UTP port.
3. Connect the other end of the UTP cabling to a Token
Ring Multi-Station Access Unit (MAU).
STP
UTP
STP
UTP