Manualshelf

User`s guide

ManualsBrandsAironet ManualsComputer equipmentAP4500
11121314151617181920
Installation
2-4
To Attach the 10Base5 (Thicknet) Cabling:
1. Make sure the unit is powered off.
2. Attach the transceiver connector to the 10Base5 AUI port.
3. Slide the locking mechanism in place.
4. Attach the other end of the transceiver drop cabling to an
external transceiver.
To Attach the 10BaseT (Twisted Pair) cabling:
1. Make sure the unit is powered off.
2. Plug the RJ-45 connector into the 10BaseT port
(Twisted Pair).
3. Connect the other end of the Twisted Pair cabling to the
LAN connection (such as a hub or concentrator).
10Base2
10Base5
10BaseT
10Base2
10Base5
10BaseT