User`s guide

Installing the Software
3-12
4. If you would like to modify the PC Card system parame-
ters, edit the AWCPKT.INI file. For a list of parameters
which can be modified, see Table 3.3.
5. Load the driver by typing AWCP45C [-cinuw]
<int_number> at the DOS prompt (i.e. AWCP45C
0x65) and press Enter.
NOTE: To unload the driver, type AWCP45C
–u <int_number> (i.e. AWCP45C –u 0x65).
6. Load the DOS IP stack.