User`s guide

Installing the Software
3-11
DOS Packet Driver Installation
The installation of this driver includes creating or editing a
configuration file (AWCPKT.INI). It is required that this file
contain the following lines:
Table 3.3 - Minimum AWCPKT.INI Driver Settings
Additional variables defined in the following section may
also be used.
The Wireless LAN Adapter can be installed in a DOS
environment using DOS IP stack products such as FTP
software.
1. Power on your computer.
2. Copy the \PKT\AWCP45C.COM file from the Aironet
Device Driver diskette to the directory containing the
network files.
3. Copy the AWCPKT.INI file from the Aironet Device
Driver diskette to the directory containing the Packet
driver.
Infrastructure Mode Ad Hoc Mode
[AWCPKT] [AWCPKT]
If INFRASTRUCTURE is omit-
ted the default will be “ON”
INFRASTRUCTURE = “NO”
SSID = “your_SSID_here” SSID = “your_SSID_here”
CHANNEL = <channel>