User`s guide

Configuring SNMP 7 - 5
NOTE: An error response will be returned to the NMS, if the NMS is trying
a “set” request used with a community that has Read-Only access.
Setting or Removing Allowed NMS IP Addresses (Ipadr)
Use the ipadr option to set or remove allowed NMS IP addresses. If the
community has a list of allowed IP addresses, only requests from an
NMS with an IP address in the SNMP communities list will be allowed.
If there is no list, any IP address is allowed. The default list is “Any.”
You will be prompted for:
1. The name of the community to change.
2. Whether you want to add or remove an IP address.
3. The IP address.
Setting or Removing Allowed NMS Node IDs (Nid)
Use the nid option to set or remove allowed NMS node IDs. If the com-
munity has a list of allowed node IDs, then only requests from an NMS
with a node ID in the list will be allowed. If there is no list, then any
node ID is allowed. If any of the above checks fail, the request will be
ignored. The default list is “Any.”
You will be prompted for:
1. The name of the community to change.
2. Whether you want to add or remove an infrastructure address.
3. The infrastructure address.