User`s guide

5 - 2 Ethernet or Token Ring Bridge

Using the Conﬁguration Ethernet or Token Ring

The Ethernet or Token Ring Port is conﬁgured using the Conﬁguration

Ethernet or Token Ring Menu. To access this menu, select Conﬁgura-

tion from the Main Menu then select Ethernet or Token Ring from the

Conﬁguration Menu.

Activating/Disabling the Ethernet or Token Ring Port (Active)

NOTE: Do not activate the Ethernet or Token Ring port until all other

parameters have been set correctly.

The active option is used to enable or disable the Ethernet or Token Ring

Port connection. The default setting for active is “On”.

Configuration Ethernet Menu

Option Value Description

1 - Active [ on ] - Connection active

2 - Size [ 1518 ] - Maximum frame size

3 - Port [ auto ] - Port selection

Enter an option number or name, Ò=Ó main menu, <ESC> previous menu

Configuration Token Ring Menu

Option Value Description

1 - Active [ on ] - Connection active

2 - Speed [ 16 ] - Ring speed

3 - Method [source_route] - Routing method

4 - Tring [ 1 ] - Token ring number

5 - Rring [ 10 ] - Radio virtual ring number

6 - Extended [ menu ] - Extended configuration

7 - Address [ menu ] - Config address conversions

Enter an option number or name, Ò=Ó main menu, <ESC> previous menu