User`s guide

4 - 4 Ethernet or Token Ring Bridge
Basic Rates (Basic_rates)
Use the basic_rates option to set up the basic bit rates for all associating
Ethernet or Token Ring Bridges in the cell.
All nodes in the cell must have the same basic rate setting in order to
associate. The highest basic rate setting is used to transmit broadcasts
and association packets. The basic rates must also be allowed data rates.
Enabling Root Mode (Root)
Use the root option to enable or disable root mode.
Bridges serving as root units are connected to the primary backbone
infrastructure and should have Root Mode set to “On.” Those acting as
remote Bridges, attached to a secondary backbone and communicating
via radio to the root unit, should have their Root Mode set to “Off”.
Those that are serving as repeater Bridges should have Root Mode also
set to “Off”. The default setting is “On”.