User`s guide

2 - 10 Ethernet or Token Ring Bridge
Using the Configuration Console Menu
The Console system is configured using the Configuration Console
Menu shown below. To access this menu, select Configuration from the
Main Menu then select Console from the Configuration Menu.
Setting the Terminal Type (Type)
The terminal type may be set to Teletype (TTY) or ANSI using the
Configuration Console Menu.
If the terminal or emulation program you are using supports the ANSI
escape sequences, you should use ANSI.
n Teletype mode: Displays text with little or no formatting. Screens
are not cleared prior to new screens appearing.
n ANSI mode: Provides text in a formatted manner. In addition, the
screen will be cleared before each new screen is displayed.
Configuration Console Menu
Option Value Description
1 - Type [ ansi ] - Terminal type
2 - Port [ menu ] - Port set-up
3 - Rpassword - Set readonly privilege password
4 - Wpassword - Set write privilege password
5 - Linemode [ off ] - Console expects complete lines
6 - Telnet [ on ] - Allow telnet connections
7 - Http [ menu ] - Manage HTTP connections
Enter an option number or name, Ò=Ó main menu, <ESC> previous menu
>_