User`s guide

2 - 6 Ethernet or Token Ring Bridge
Command Line Mode
Another way to move within the Console is to enter commands directly
from the Main Menu. Commands allow you to bypass the menu system
and go directly to any level sub-menu or option. Enter the list of sub-
menus, command names, and information separated by space characters.
Example 1: To access the Radio Configuration Menu (located two sub-
menus down):
1. At the Main Menu prompt type:
configuration radio
2. Press ENTER. The Radio Configuration Menu appears.
Example 2: To access the packet size option from the Radio Link Test
Menu (located three sub-menus down):
1. At the Main Menu prompt type:
configuration radio linktest size 25
2. Press ENTER and the Main Menu is re-displayed.
Telnet Access
Once the Ethernet or Token Ring Bridge has been assigned an IP address
and connected to the infrastructure, you may connect to the Console sys-
tem from a remote PC or host by executing the telnet command.
Once the connection has been made, the Main Menu will appear. The
Main Menu functions the same for both telnet access and Serial Port
connections.