User`s guide

1 - 12 Ethernet or Token Ring Bridge
Back Panel Indicators (Ethernet Only)
The back panel indicators shown in Figure 1.9 are:
n 10BaseT polarity: Solid amber to indicate the 10BaseT polarity is
reversed. Check cable connections.
n 10BaseT active: Solid green to indicate the 10BaseT has been config-
ured as the active port.
n Ethernet Rx: Flashes green when an Ethernet packet has been
received.
n Ethernet Tx: Flashes green when an Ethernet packet has been trans-
mitted.
n 10Base2 active: Solid green to indicate the 10Base2 has been config-
ured as the active port.
n
Packet Collision: Flashes amber to indicate a packet collision has
occurred.
Figure 1.9 - Back Panel Indicators
10Base2
10Base5
10BaseT
Packet
Collision
Ethernet Tx
10BaseT polarity
10BaseT active
10Base2 active
Ethernet Rx