User`s guide

1 - 10 Ethernet or Token Ring Bridge
Viewing the Indicator Displays
Top Panel Indicators
The indicators are a set of displays located on the top panel of the
Ethernet or Token Ring Bridge unit.
n Ethernet or Token Ring Indicator – Used to indicate infrastructure
traffic activity. The light is normally off, but will flash green when-
ever a packet is received or transmitted over the Ethernet or Token
Ring interface.
n Status Indicator – Shows solid green when the Bridge has accepted
a radio association.
n Radio Indicator – Used to indicate radio traffic activity. The light is
normally off, but will flash green whenever a packet is received or
transmitted over the radio.
When the Ethernet or Token Ring Bridge is initially powered up, all
three displays will flash amber, red and then green, in sequence. If a
power-on test fails, the status indicator will go solid red and the unit
will stop functioning. See Table 1.1 for a detailed explanation of the
Top Panel indicators.
Figure 1.8 - Top Panel Indicators
RadioStatusEthernet
or Token Ring