User`s guide

Installing the Bridge for Ethernet or Token Ring 1 - 9
Attaching the AC/DC Power Pack
and Powering On the Ethernet or Token Ring
Wireless Bridge
1. Insert the small plug on the end of the AC/DC power pack cord into
the power port.
2. Plug the AC/DC power pack into an electrical outlet.
(120VAC/60 Hz or 90-264VAC as appropriate)
3. Power on the Ethernet or Token Ring Wireless Bridge by pushing the
On/Off button.
When power is initially applied to the Ethernet or Token Ring Bridge,
all three indicators will flash in sequence to test the functionality of the
indicators.
Figure 1.7 - AC to DC Power Pack Connections and On/Off Button
On/Off Button