User`s guide

1 - 8 Ethernet or Token Ring Bridge
Installing the Token Ring Connection
The Token Ring Wireless Bridge supports three connection types:
n Shielded Twisted Pair (STP)
n Unshielded Twisted Pair (UTP)
è To Attach the STP Cabling:
1. Make sure the unit is powered off.
2. Attach the transceiver connector to the DB-9 port.
3. Attach the other end of the transceiver drop cabling to a Token Ring
Multi-Station Access Unit (MAU).
è To Attach the UTP Cabling:
1. Make sure the unit is powered off.
2. Plug the RJ-45 connector into the UTP port.
3. Connect the other end of the UTP cabling to a Token Ring Multi-
Station Access Unit (MAU).
STP
UTP
STP
UTP